Jamz

Pin 3 (black orange) is your earth (12v -) Pin 7 (orange) is your positive (12v +)

did you not get the wires and plug to go with it???? When i got mine, the people just snipped the wires and plug, so i just attached the wires to where they need to go... Here's the wiring diagram:

I dont seem to have the wiring diagram on my photobucket any more.... will find it when i get back home for u

Glad you got it sorted... a few of us have had to do this

Your not the only one, I have the same problem with mine, as you, if it does start to rain hard, i just knock the stick up. Dont think there is anything you can do

Was gonna say... :lol:

They are quite nice tooo

Was that Romax by any chance?

How about the one's kevin davies has on his st?

have u tried pushing the lock back in towards the car to re-engage the lock mechanism... this has happened to a couple of us... when we replaced our grills.

Petorl?

That is shocking... ive got a 2.0L and i get 29.9 town driving and 40.1mpg motorway driving

Aye... what rez are you running

From 16's To ST 18's:

Ronaldo, you should only use them if its foggy

As long as they do them in 5x108 yes they will fit... but you could probably get a decent set of ST rims for that price!

while i had the wheel arch off to fit my new bumper, i found loads of space above the wheel arch, and moved the ballasts under there..

You can actually buy HID's for your fog lights

Im sure its all held on by like U clips... but dont quote me on that... I dont think anyone has ever changed the seat covers tbf

And i thought my clutch was going, but it seems not mayo10uk, You sure the spring didnt snap, as mine did, and it did this to me untill i got it fixed

Like said above.. remove the eye lid bit, then the cover comes off... then the fog lamp is held in by two screws, and it comes out

Hope you've got plenty of WD40

The scuttle panel is easy to remove... first remove the window wipers (you get to the bolt by removing the rubber cover) Next remove the metal clips (the one's which are closest to you... think there is 5 clips IIRC) Once you have removed the clips, the top panel come off... then next at each side there is a torx bit, which you undo, lift the lower panel up and pull towards you, and thats it :D... 2 min job

My brother has similar clocks in his car, and thats where the above shows...