Jump to content
ffoc.co.uk

inzor

Registered Users
  • Content Count

    616
  • Joined

  • Last visited

Everything posted by inzor

  1. my 2005 mk5 zetec has a low washer fluid warning, not sure if its on all mk2 or just on some models though.
  2. Tebbs4489, front bumper already primed i think. as zetecste said, removal and fitting by ureself will bring costs down. the strips get pretty bent up when u take them off, might be best getting primed ones, will save on sanding and priming costs too.
  3. when you turn the engine on or when you start moving?
  4. air still comes through my fans when they're off and im moving, i think its normal. cant help with anything else tho, my car seems to have a similar, but quite minor juddering when idle.
  5. but its so satisfying at the same time. :lol:
  6. after having a few SD cards ide recomend an 8gb or higher one. i can fit a few movies or loads of high quality mp3s on it.
  7. with the right tyres on it the radius of the wheels should stay the same, so the car should sit at the same hight. and not need the speedo recalibrated either.
  8. http://www.ruderacing.co.uk/Suspension_ ... Mk2_(2004+)_Suspension-Ford_Focus_Mk2_(Hatch)_Suspension/c713_804_823_825/p162470/Eibach_Lowering_Springs_for_Ford_Focus_Mk2_Hatchback_(2004+)/product_info.html when going through the ordering proccess there is a FFOC discount available, think its a tick box. will reduce the price to about 115£ if i remember right.
  9. its more than worth it, get them bought :!:
  10. it'll be fine, worry more about cleaning the glue stuff off the car. the guy who did mine had to use power tools :shock:
  11. the guy that did mine didnt use a hair dryer, he had a plastic tool to slip behind them untill he could get his fingers in, then he pulled (and pulled) untill they were off. they come with pins and double sided tape stuff on them and you cant really go wrong puting them on. credit card might work, leave the car out in the sun for a while to warm up the tape on the old strips or something.
  12. darando, you can get the door strips, fog brows and boot handle primed. but the strip on the back bumper cant be bought primed.
  13. as dan said, give them a wipe so theres no dust on them, then apply thin coats of paint every 15 minutes. when all the paint is on leave it 24 hours before applying the laquer. you dont really need to sand anything imo.
  14. :new-bday: 9k older than mine, i celebrated its 40th last month :D you had the sence not to capture the speed you where doing when the photo was taken tho :oops:
  15. cheapest mod is the ciggy cover i got to stop pennies falling in and blowing the fuze 2x a week.
  16. lol, the 1 with only like 4 fuses in it. sorry.
  17. in my mk2 zetec its the 3rd from the left on the top row, number 35 or something. i think the top row only has like 4 fuses in it. under the glove box.
  18. ScottyGhia, thanx ill have a look for some there :D
  19. ScottyGhia, looks great! how much did the buttons cost you? i might want to get some, ide need 2 blanks and the front and rear screen buttons.
  20. might get my mate to make 1 from a sheet of plastic from his work :lol:
  21. mud :lol: got a price today. for that little sheet of plastic to go under the engine bay....£56!!! :shock: :shock: i wont be buying it.
×
×
  • Create New...