Jol

Does anyone know how to remove the centre vents? Its prob an easy job i just dont want to break anything whilst doing it. Also would it then be possible to run a wire down the vent? The wire would be need to be routed to the back of the lighter socket to hard wire or could be plugged into the front of the socket. Thanks in advance Jolly :D

Trust me, did'nt even notice, far too early in the am for me Jolly :wink:

Yes cheers just had a go and it came off quite easily. Thanks again Jolly

Cheers Jo will give at a go. Theres no clips or anything that you can snap off then? Jolly

Does anyone know how to remove the fog light covers in order to change the bulbs. I had a look through the manual and its a bit vague and i dont want to break any bits. Photos would be appreciated. By the way its a 2006 zetec with standard fogs. Many Thanks Jolly :D

The shampoo and polish are Megs Gold Class. I got the reverse and fogs from GBK performance which can be found on E bay or you can do a Google. How close do you want a photo of the rear lights Rocky? Cheers Jolly

Thought i take advantage of the weather and introduce the car to Meguiars. First time i've used there products and am very impressed. Also fitted rear lights. Pictures below, let me know what you think!! Cheers Jolly

Yes, they are H8's, but not many places sell them at the min. Also the standard bulbs already fitted are 35w and once again most places that do sell them only offer a 35w bulb so no point as not upgrading them. I bought some from Ace Parts that said in the advert that they were 55w but when i received them they were 35's. Try a Google for them, there's a couple out there. Hope that helps Jolly :)

Having checked through the site and not finding any info, with reference to the 18's fitting, does anyone know if Mk2 ST alloys fit directly with no bother to a Zetec. Jolly :?:

Many thanks will have a look on the previous sticky thread Cheers Jolly :)

A little help if possible, can i fit 18's straight onto a Mk2? Do i have to get the car modified in any way before fitting e.g limiters etc? Many thanks :?: Jolly

I am assuming that due them being fitted by Ford that the warranty is unaffected, also they are the same springs that can be fitted as an option from the brochure. It had'nt been polished in that picture however it had just been washed with Autoglm car shampoo. Must just be the angle and the light believe me it doent look that shiny in reality. Next im thinking of colour coding all the black plastic bits, does anyone know a rough price?? Many Thanks Jolly 8)

Yes, its the drive not the car, it leans towards the house. :)

Thought id post some pics after finally getting Eibachs fitted by Archers of Ashby. Great deal £249 all in, cant go wrong when most Ford dealers around Oxford would either not do them or wanted over £500. Anyway here they are. Jolly