Jump to content
chrisknott.co.uk

The Artilleryman

Registered Users
  • Content Count

    106
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Yes, it's very easy to take out. It comes in three parts, facia panel, box itself and the display screen. But what are you going to replace it with ?
  2. The lock is held in by a bolt on the back edge of the door, it may just be a case of loosening the bolt push the lock back in and tighten the bolt.
  3. I'm getting 37mpg, it's all short journey's round town. Haven't had any decent weather, so haven't done any long runs (and the first one we do will be in SWMBO's 1.6L 150 ecoboost - I want to see what it will do)
  4. One year on and we now have 2 Focus mk3's. His Titanium, candy red, 1.6 petrol 125ps, city pack. Hers Titanium, candy yellow, 1.6 petrol 150 ecoboost, city pack, appearance pack. Hers might be a 61 plate, but it rolled off the production line 5 weeks before mine.
  5. I have a college at work who has a late 2007 Focus mk2 Ghia (series 35) with an island series Sony h/u with manual aircon and wood effect facia. Will need a couple of days to visualy confirm this. But using her vehicle details the facia part comes out as :- 7M51-18522-CASMDJ Hope this helps Checked the car, facia is slightly darker than your original.
  6. I have a college at work who has a late 2007 Focus mk2 Ghia (series 35) with an island series Sony h/u with manual aircon and wood effect facia. Will need a couple of days to visualy confirm this. But using her vehicle details the facia part comes out as :- 7M51-18522-CASMDJ Hope this helps
  7. Car needs to be told it's got BT. Will need to be connected to Fords IDS (laptop) to change entry in CCF. At the moment your mobile is picking up the BT module, but as the car does not know it has BT fitted, the BT module cannot comunicate with the stereo - to display the code you need to enter on your mobile.
  8. It's a random code, you may need to try several times before the BT module will give you a code to enter. Enter 0000, it won't take it, but should then give you a code. Even the Focus mk3 has this problem - had to try twice before it would give SWMBO a code for her hire car.
  9. Not sure if BT will work and if you used the Fiesta loom (designed for mono output BT modules) you will need to modify the harness so the aux socket wires go to the BT module and then from BT module to Sony h/u (stereo input).
  10. IIRC is that not just for BT/USB modules Good point, yes. Still not sure if the OP's Sony will work in a Focus.
  11. What's the firmware for the Sony h/u (in radio mode, press 1 & 6 together, first set of nos. are firmware) needs to be 05-03-03 or later to work. What BT module are you using ie whats the Ford part no. ? (xxxx-xxxxxx-xx) BT needs to "switched on" in the car configuration file via Fords IDS (laptop).
  12. Two reasons, the wholesale price of copper has risen dramaticaly and these harness's are made in small batches, which increases the price as well.
  13. All Focus mk2/2.5 are bluetooth compatible. Focus mk 2.5 Sony h/u's with firmware 05-03-03 or later support USB and A2DP (BT streaming).
×
×
  • Create New...