Hi Revoltos, The installation only requires 3 steps: 1) Removing the stereo. I took a few photos of the stereo removal, as I found it to be the most painful part. 2) Inserting the ISO wiring loom. This is pretty straight forward. Remove the Quadlok connector from the back of the stereo and plug it into the female quadlok connector on your ISO wiring loom. Then plug the male quadlok connector from the ISO wiring loom into the stereo. Finally swap the fuse connectors around so the constant 12V goes to the switched 12V feed and the switched 12V to the constant 12V of the Parrot unit. 3) Route