Ronaldo

Oh is that why mine smells funny? how do i get rid of smell lol

ask and see LOL

I dunno mate if its hooked up but i think original one is different. If you look under the rear driver side wheel u will see a grommet, if u see a small plug thing sticking out then that would be the sensor connection and when u remove the bits inside where the grommet is u will see a adaptor.

i had a black ST bumper fresh painted and sold for 83 pounds...lol few weeks back

the bumper was used in primer and then painted but after fitting i got some scratches on it :( so i had to buy all the parts needed to fit incl fogs/reverse surrounding

maybe because you already had all brackets already on the bumper

Hi mate, the only annoying thing about them is that they are hard to adjust, there is no motor for up/down so the switch inside is useless. But once you get it adjusted its great. I have HID so LOADS of light on the ground. There is a kick up to the left which i used to find annoying but used to it now and helpful to see people on the side of the road. It might not be worth the effort if you have original HID but does look every nice. I changed the LED on angel eye to white looks great at nite with just them on but when there is some day light its not as bright as BMW's angel eye but then

Hi mate, the bumper and bracket is on like it should be except buttom space has got cable tie. But i is not why fogs dont fit properly. So the little screws/plugs that hold spacer and bumper onto bracket, how are they forced in? mine are too small but i have a feeling i need a tool that will go inside to expand it?

Guys finally got it off. The problem i faced was the little screws to mout the spacers abd bracket to bumper were too small or i needed a tool to expand them, i just connected the top and left the lose screws and at the buttom i used cable ties. Now is there a tool i need? also about the bracket that Jamz just put, i thought they was the actual big bracket used to connect bumper. So i wil get them soon. Oh is the ST fog and reverse different? mine didnt fit 100% with bezel

I put ST rear and retro parking sensors and saw the loom for ford's parking sensor near the grommet.

How much are they and do you have finis? Also i'm having problems taking off bumper, i took the 2 screw behind boot and 2 on the wheel arc and 2 below. Now am i meant to unscrew the bracket off? if so how do i do that? i can see a nut behind the wheel arc cover but it will be akward to take off. Thanks

got ya lol

i dont follow, the exhaust end pipe is melting bumper or under the bumper as the pipe runs down? or the original exhaust is touching the ST bumper? oh yh i'm not using ST front bumper, i'm using this :D

Ok i have another one for you guys, i know we couldnt figure out the 1st plug. I opened glove box to see the loom for aux in and i found it but which one is it? i have 2 both taped up and i removed one tape. lol

lol i drew that, i did all the google and no joy so far, let me know if you find anything

i want a cheap exhaust but not found anything, piper one is far too expensive compared to say actual ST one . I be happy with a basic pipe like this does not need to be all stainless steel except ends european-parts one is around £270 incl shipping but that does not fit ST rear without cutting and welding(full stainless steel and middle box for sound)

good to hear you're ok, yh is it all declared and who you insured with?

the bit under bumper with screw holes? where you looking to get exhaust mate?

yh mate have done that. as long as i can use old bracket and use spacers then its fine, i have asked for a quote for fog/reverse bits and spacer and screws.. just ordered Drivers Fog Bezel – 1378128 Drivers Fog Surround – 1406906 Passengers Fog Bezel – 1378129 Passengers Fog Surround -1406907 Spacers: LH 1367869 RH 1367898 f1074185 x14 screws £45 delivered

hey mate, when i went ford the part number for bracket was different, you got Spacers: LH 1367869 @ £0.32 inc vat (pic below 17C897A) RH 1367898 @ £0.32 inc vat (pic below 17C897B) Brackets: 1366997 @ £2.75 inc vat 1366994 @ £2.75 inc vat They gave me 1434189 1434190 11.50 each so confused. Will be able to use standard bracket and just get spacers?

Hey mate do the brackets from old bumper fit ST one? do they look the same?

I got my bumper waiting the fixing and fog/reverse surround are epensive so tryin to see if i can get few things from ebay, i also need skirt and spoiler to complete

comes off too easy for my liking tbh

I had same problem and yesterday i pulled off the bit near window and use "flash" and rubbed it and it worked lol

wat you planing to fit?