Jamz

They stop the wheels looking like /-------------\ and put it so it looks like this |--------------|

Mine is auto up and down on both passenger and drivers side

Just use a wire brush and some hammerite paint ;)

I have a mk2 and a space saver, mine didnt have any polystyrene at all... the carpet has a wooden type part where the wheel recess is, to stop it from sagging down.... and thats it.

hold the lock button down on the remote fob, it will close the windows.... and vice versa with the open button ;)

nope not fitted any... need to fit some though

with the window up, hold the down button till the window goes all the way down and count 5 seconds... then same for the up

Mine is right at the top of the rear window, just below the 3rd brake light... easily seen from behind and out of the way IMO:

Hmm i dont see how when quite a few of us have lowered our cars and not had this problem :?

inzor, Why did you cut the polystyrene... when you get a space saver, the carpet just goes over the top... no polystyrene in there what so ever

The wheels on my ST rims are 225/40/18

Errr... its a focus :?

Nope.... full boot and full car, no rubbing at all... there is loads of space under them arches

Uhuh, you can see from this picture:

Its lowered 65mm front 70mm rear

Load of $$$$$ the clocks on the car are 10% out anyway, putting bigger rims on the car will make it more accurate, Ford offer different size wheels as standard, i doubt they will plug it into their PC once they change wheels.... I had 16s on my car and now have st 18's on and my clock is around 4mph out, which is the same as what it was when i had the 16s on

Dont take it to them... find a different tyre place wich has a laser alignment... they can change it then

Aye same ride hight, but as has been said... firmer springs

There is actually a resivoir under the drivers side head light... if you remove that, there is one there... not sure if its a sealed unit though

There is no power steering fluid.... its electric steering

the undercover is two peices... the front bit coveres the engine and the other bit overs the front axel's and things.... just need to remove the front one, few bolts at the front and a few in the middle, and slides off

Well there is an explosion happening in your car... which is why its hot... i would expect it to be that hot :roll:

Just thought then, if they just left the hub hand, it could have broken somehting in the steering rack:

Nope..... well.... the steering rack connects to the hub, and you have to hammer the shock out of the hub... but i dont see how they could have manage to make the oil come out of the steering rack in the middle :S

ST Pedals are just a direct replacement... couple of bolts and thats pretty much it..... ive gotta do mine when i get them